HOME COMPANY PRODUCTS SERVICES REQUEST QUOTE CONTACT US
Product Categories
Products / Canter - 4 Sided

HewSaw R200 MSA
Product Number: 6066
- Late 90's
- Feedrate - 245 ft/min
- Total effect - HP
- Operating voltage - 480V / 60 Hz
- Cutting width max/min - 8" / 2.70"
- Cutting height max/min - 8.9" / 1.70"
- Feed opening - 13.7" x 13.7"
- Weight - 37,000 lbs
- Saw kerf - 0.140" average
- Saw diameter - 351 mm (13.8")
- Length of chips - target 1" - 1-1/8"
- V flight scanning conveyor approx. 50 feet long c/w electric drive
- HewSaw single log rotator c/w one (1) pair of vertical centering rolls, one pair of "hourglass" feedrolls mounted in rotator c/w hydraulic feed drive and electric ring drive and one (1) pair of outfeed feedrolls c/w hydraulic feed drive
- R200 HewSaw MSA consisting of infeed rubber tire infeed rolls, sharp chain short log feed chains, two (2) spiral side heads, top and bottom heads, moving saw assembly, separate edging module (fixed width), electric feedworks, main arbor motors and servo setworks cylinders
- Outfeed belt conveyor (hinged)
- Outfeed belt conveyor #2
- Hydraulic power unit (feedworks and setworks)
- MPM log scanning and optimization (combination light curtain scanner and two (2) profile scan heads)
- MPM based PLC control system c/w QB setworks controllers and I/O required for complete control system
- Split type operator's console c/w HMI Touch screen and push buttons, joysticks, etc
- One (1) HewSaw knife grinder
- Parts books and operator's manual for HewSaw system

- 480volt/3 phase/60 hertz power, 120 volt/single phase/60 hertz control power
- Machinery still in operation until May 2017