HOME COMPANY PRODUCTS SERVICES REQUEST QUOTE CONTACT US
Product Categories
Products / Canter - 4 Sided

HewSaw R200 MSA SE
Product Number: 5829
- Year 2004
- Feedrate - 245 ft/min
- Total effect - 1079 HP
- Operating voltage - 480V / 60 Hz
- Cutting width max/min - 8" / 2.70"
- Cutting height max/min - 8.9" / 1.70"
- Feed opening - 13.7" x 13.7"
- Weight - 37,000 lbs
- Saw kerf - 0.140" average
- Saw diameter - 351 mm (13.8")
- Length of chips - Target 1" - 1-1/8"
- V flight scanning conveyor approx 50 feet long c/w electric drive
- Hewsaw single log rotator c/w one (1) pair of vertical centering rolls, one pair of "hourglass" feedrolls mounted in rotator c/w hydraulic feed drive and electric ring drive and one (1) pair of outfeed feedrolls c/w hydraulic feed drive
- R200 Hewsaw MSA SE consisting of infeed rubber tire infeed rolls, sharp chain short log feed chains, two (2) spiral side heads, top and bottom heads, moving saw assembly, separate edging module (fixed width), electric feedworks, main arbor motors and servo setworks cylinders.
- Outfeed belt conveyor (hinged)
- Outfeed belt conveyor #2
- Hewsaw System Hydraulic power unit (Feedworks and setworks)
- Prologix log scanning and optimization (Combination light curtain scanner and two (2) profile scan heads)
- Prologix Omron based PLC control system c/w Delta - Tau setworks controllers and I/O required for complete control system
- Prologix Split Type Operators console c/w HMI Touch Screen and push buttons, joysticks etc
- Two (2) Hewsaw knife grinders ( one for main chipper knives and one for edging tools)
- Spare parts for Hewsaw system (saws, knives, two (2) chipper heads c/w facing saws, rubber tire (no studs), debarker feedrolls, spare VFD for Rotator, edging tool arbor motor)
- Parts books and operator's manual for Hewsaw system

- 480volt/3 phase/60 hertz power, 120volt/single phase/60 hertz control power
- Machinery is dismantled and ready to load onto trucks