HOME COMPANY PRODUCTS SERVICES REQUEST QUOTE CONTACT US
Product Categories
Products / Sawmill

Running Sawmill for Sale
Product Number: 4678
- Located on Vancouver Island
- 5 acres c/w 24’ x 52’ 2-bedroom trailer
- Reman building 70’ x 100’; all steel; insulated
- Sawmill 30’ x 175’, partial steel & wood; 2 stories
- 600-volt electrics but many pieces of equipment are 460 volt
- Cut: Yellow cedar-50%, Fir-25%, Hemlock-25%
- Purchased logs on the open market and buys through government timber sales
- Has Category 2 license, can bid on Category 1 and 2 log sales
- Logs come 21’ – 41’ long to the mill
- Bucked on site (chainsaw)
- Diameters (tries to get larger diameter logs) 18” – 60”

Sawmill
- Built in 1990
- Yellow cedar: 300 – 400,000 tree stakes per year
- Spindle blanks to Ontario
- 12,000 board feet of lumber per day with 4 people
- Infeed deck to Rosserhead
- Rosserhead is not hooked up. Needs $10,000.00 to finish electrical
- Can debark up to 20’ x 48” then kicks across to infeed deck to the carriage line c/w log stop & loader
- Infeed deck to carriage
- Log turner – hydraulic (4’)
- 48” – 3 bunk Salem carriage, RH
- Salem setworks; air cylinders – electronic activated. Wager electric clutches on bunks
- V and flat rail
- Hydraulic drive through cable 100 HP on hydraulic power unit
- Mechanical strain 6’ Klamath headrig
- Single cut
- c/w clearing belt
- Worm drive on strain
- Cab & controls
- 200 HP ODP motor
- 6 saws with headrig, 13” wide x 39” long, 3/16 kerf
- Outfeed rollcase to edger transfer or can go straight through to green chain
- Infeed transfer to edger
- Collared Esser edger c/w 22” saws (1 fixed, 3 shifting, could be 4 shifting)
- Elworthy setworks
- Lasers - 1 fixed, 3 shifting via cables
- Outfeed rollcase onto landing deck transfer to conveyor, which fed another deck to green chain.
- Green chain 50’ long x 20’ wide c/w H78 chain

Small Log Line
- Forrestor model Tom Sawyer horizontal bandsaw system
- Will cut 27” diameter logs
- Can accommodate 40’ material
- 30 HP motor, 460 V
- 5 HP on hydraulic
- c/w controls
- Digital setworks by Forrestor
- c/w dust bag for saw
- 2” – 4” wide saw blades can be used
- 25 saws @ 2” wide of which 4 or 5 are stellite
- Outfeed cross transfer to rollcase which ends up at the edger
- 30’ Forano vibrating conveyor
- Soderhamn 48” chipper, 6 knife (in basement)
- 75 HP
- Horizontal in, bottom out
- Tub grinder for chipper knives
- Miscellaneous drag chain waste conveyors
- 18” x 18” hammer hog, 50 HP, 575 volt
- Drop feed c/w sheeting
- Bottom discharge
- Electrical MCC’s
- Power distribution
- Transformers

Reman Plant
- Tilt hoist (18’)
- Lumber transfer to two (2) only Doucet chop saws c/w stops
- Was being used to cut to length only (was not used to cut out knots)
- Maximum 12” wide x 5” depth of cut
- One (1) is new, one (1) is 5 years old
- Waste conveyor
- Blower for sawdust
- Transfer deck (heavy duty from pulp mill)
- Belt conveyor that took shorts
- Turner 42” tandem twin bandmill c/w 30 HP, 575 volt motors
- Side x side
- Straight splitting
- Air shift on infeed for different widths
- Second saw shifts with hydraulic cylinder
- SCM 3 rip saw, 30 HP, 460 volt
- 8 ½ “ wide slat bed dip chain will take up to 13 saws
- Was running 5 saws
- 10 saws available
- Cantec vertical 32” bandmill
- 15 HP, 575 volt
- 2” wide bands
- Tilting table
- Wadkin FD9 6 head moulder
- 4” x 9”
- Maximum 150 FPM, was being used at 50 FPM
- Fed with scissor lift, 3000 lbs
- 2 extra scissor lifts
- Wadkin profile grinder
- Some spare heads
- 2 Hobart welders, 300 amp
- Torches
- Plazma cutter
- All hand tools

Mobile Equipment
- 1973 966C Cat c/w grapple (also has bucket)
- 23.5 x 25 wheels
- 36 ply tires
- 8000 lb forklift, 1964 Hyster
- Propane
- 5000 lb Hyster, 1996
- Propane
- 4 cylinder GM motor

- Photos on request